AnchorRescue AR100 Інструкція з експлуатації - Сторінка 3

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Човнове спорядження AnchorRescue AR100. AnchorRescue AR100 6 сторінок. Anchor retrieval system

brought over the bow roller and secured
normally.
10. Replace any missing cable ties once the
anchor is stowed safely. The
AnchorRescue is now ready to protect the
anchor from a snag the next time you
deploy the anchor.
11. Before returning the retriever to its nylon
bag rinse it with fresh water if available.
Again, check the capture pins to ensure
they are moving freely before storing the
retriever.
12. If the capture pins do not move freely, it
may be necessary to remove them and
flush out any trapped mud or debris in the
pin passage. Simply remove the retaining
screws, capture pins and springs. Then,
flush the passages with clean water,
visually inspect them, and reassemble. Do
not over tighten the screws and make sure
the screw head is even with or slightly
below the surface of the retriever. Again,
check for free movement of the pins.
Note: Be careful not to lose the
capture screws, pins, and springs.
Scanmar International, Inc.
www.anchorrescue.com
Phone
510-215-2010