Electrolux ESF 63021 Посібник користувача - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник користувача для Посудомийна машина Electrolux ESF 63021. Electrolux ESF 63021 20 сторінок.
Друкувати сторінку6 electrolux
4. Install the lower basket.
5. Close the door.
Electronic adjustment
The water softener is set at the factory
at level 5.
1. Press and hold the start/cancel button.
Turn the programme knob clockwise
until the programme marker agrees
with the first washing programme on
the control panel.
USE OF DISHWASHER SALT
Caution! Only use dishwashers salt.
Types of salt that are not applicable for
dishwashers cause damage to the
water softener.
Caution! Grains of salt and salty water
on the bottom of the appliance can
cause corrosion. Fill the appliance with
salt before you start a washing
programme to prevent corrosion.
Do these steps to fill the salt container:
1. Turn the cap anticlockwise to open the
salt container.
2. Fill the salt container with 1 litre of wa-
ter (only the first operation).
2. Release the start/cancel button when
the on/off indicator light and the start/
cancel indicator light start to flash.
– At the same time, the end indicator
light flashes to show the level of the
water softener.
Example:
5 flashes, pause, 5 flashes, pause,
etc... = level 5
3. Press the start/cancel button one time
to increase the water softener level by
one step.
The end indicator light shows the new
level.
4. Turn the programme knob to the off
position to save the operation.
3. Use the funnel to fill the salt container
with salt.
4. Remove the salt around the opening of
the salt container.
5. Turn the cap clockwise to close the salt
container.
It is normal that water overflows from
the salt container when you fill it with
salt.
When you set electronically the water soft-
ener to level 1, the salt indicator light does
not stay on.