Electrolux ESF 6710ROX Посібник користувача - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник користувача для Посудомийна машина Electrolux ESF 6710ROX. Electrolux ESF 6710ROX 20 сторінок. Electrolux dishwasher
Друкувати сторінку10 www.electrolux.com
4. Adjust the water softener to the water
hardness in your area.
5. Adjust the released quantity of rinse
aid.
5.5 XtraPower
This option increases the water pressure
in the prewash and washing phases by
40%. The washing results are very good
also with heavy soiled loads.
How to activate the XtraPower option
1. Press Option until the XtraPower indi-
cator comes on. In the display you can
see the update of the programme du-
ration.
• If the option is not applicable to the
programme, the related indicator
does not come on.
5.6 Acoustic signals
The acoustic signals operate when the
appliance has a malfunction. It is not pos-
sible to deactivate these acoustic signals.
There is also an acoustic signal that oper-
ates when the programme is completed.
By default, this acoustic signal is off, but it
is possible to activate it.
6. BEFORE FIRST USE
1. Make sure that the set level of the wa-
ter softener agrees with the water
hardness in your area. If not, adjust
the water softener. Contact your local
water authority to know the water
hardness in your area.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
6.1 Adjusting the water softener
German
degrees
(°dH)
51 - 70
Water hardness
French
mmol/l
degrees
(°fH)
91 - 125
9.1 - 12.5
How to activate the acoustic signal
for the end of programme
1. Press the on/off button to activate the
appliance.
2. Press Reset for a few seconds.
3. Press and hold, at the same time, De-
lay and EnergySaver until the indica-
tors
,
start to flash.
4. Press Delay,
• The indicators
go off.
•
The indicator
flash.
• The display shows the current set-
ting.
Acoustic signal on
Acoustic signal off
5. Press Delay to change the setting.
6. Press the on/off button to deactivate
the appliance and to confirm the set-
ting.
5. Processing residues can stay in the
appliance. Start a programme to re-
move them. Do not use detergent and
do not load the baskets.
If you use the combi detergent
tablets, activate the Multitab op-
tion.
Clarke
degrees
64 - 88
and
and
continues to
Water softener
adjustment
Manual
Elec-
tronic
1)
10
2