Electrolux ESF 8620ROX Посібник користувача - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник користувача для Посудомийна машина Electrolux ESF 8620ROX. Electrolux ESF 8620ROX 20 сторінок.
Друкувати сторінку
10
www.electrolux.com
3. Press Delay again and again to
change the setting.
4. Press the on/off button to confirm the
setting.
6.4 Use of rinse aid and multi-
tablets
The factory setting of the rinse aid
dispenser is with the dispenser activated.
This means that the rinse aid dispenser
always releases rinse aid.
It is possible to deactivate the rinse aid
dispenser, in this case the dispenser will
not release rinse aid only if the option
Multitab is activated.
If the dispenser is deactivated and you do
not select the option Multitab, the
dispenser will release rinse aid.
The use of the option Multitab with the
rinse aid dispenser deactivated may not
give satisfying drying results.
When the rinse aid dispenser is
deactivated, the rinse aid indicator is
always off when the option Multitab is
activated.
How to deactivate the rinse aid
dispenser
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously Delay and Start
until the indicators
and the display is blank.
2. Press Option.
• The indicators
• The indicator
• The display shows the current
– The levels of rinse aid are from
0A to 6A.
– Level 0 = no rinse aid is
released.
,
and
go off.
to flash.
setting:
= the rinse aid
3. Press Option to change the setting.
deactivated.
4. Press the on/off button to confirm the
6.5 Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic signal
is deactivated but it is possible to activate
it.
How to activate the acoustic
signal for the end of programme
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
2. Press Start
3. Press Start to change the setting.
,
4. Press the on/off button to confirm the
start to flash
6.6 MyFavourite
,
and
With this option you can set and save the
programme that you use more frequently.
continues
You can only save 1 programme. A new
setting cancels the previous one.
dispenser is activated (factory
setting).
= the rinse aid dispenser is
setting.
hold simultaneously Delay and Start
until the indicators
,
and
and the display is blank.
• The indicators
and
go off.
• The indicator
• The display shows the current
setting:
= Acoustic signal off.
= Acoustic signal on.
setting.
,
start to flash
,
continues to flash.