formlabs Form Wash Посібник із швидкого старту - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Ультразвуковий очищувач ювелірних виробів formlabs Form Wash. formlabs Form Wash 13 сторінок.

Друкувати сторінку

Changing the IPA

1. REMOVE THE WASH BUCKET AND INNER LID

Start with the outer lid open, the platform mount raised, and the basket

removed. Lift the wash bucket forward and upward to remove it from

the base. Set the wash bucket on a clean, stable surface, then lift to

remove the inner lid.

TIP

Use separate wash baskets and wash buckets to preserve

part color and quality. Maintain separate equipment to meet

biocompatibility requirements.

2. USE THE SIPHON PUMP

With the wash bucket elevated,

insert the rigid tube into the

saturated IPA and the flexible

tube into the used IPA storage

vessel. Squeeze the siphon

pump's handle several times.

Hold and gradually release the

pump when IPA begins moving

through the pump.

3. CLEAN THE WASH BUCKET

Optional – For the cleanest wash,

rinse the wash bucket with IPA

and wipe with a paper towel.

4. REFILL WITH FRESH IPA

Use the siphon pump or pour from a container of fresh IPA to refill the

wash bucket between the minimum and maximum fill lines.

5. INSTALL THE INNER LID

Align the front edge of the inner lid with the wash bucket's edge, then

lower the lid directly onto the top of the bucket.