Dreame DreameBot L10 Prime Посібник - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник для Пилосос Dreame DreameBot L10 Prime. Dreame DreameBot L10 Prime 11 сторінок. Robot vacuum and mop with automatic mop cleaning

Друкувати сторінку

Safety Information

Usage Restrictions

Do not vacuum hard or sharp objects. Do not use the appliance to pick up

objects such as stones, large pieces of paper or any item that may clog the

appliance.

Plug must be removed from the socket-outlet before cleaning or maintaining

the appliance.

Do not wipe the robot or the base station with a wet cloth or rinse them with

any liquid. After cleaning washable parts, fully dry the parts before reinstalling

and using them.

Please use this product in accordance with the instructions in the User Manual.

Users are responsible for any loss or damage that arises from improper use of

this product.

Batteries and

Do not use any third-party battery or base station. The robot can only be used

with the model RCWC1 base station.

Charging

Do not attempt to disassemble, repair, or modify the battery or the base station

on your own.

Do not place the base station near a heat source.

Do not use a wet cloth or wet hands to wipe or clean the base station's

charging contacts.

Do not improperly dispose of old batteries. Unneeded batteries should be

discarded at an appropriate recycling facility.

If the power cord becomes damaged or broken, stop using it immediately and

contact after-sales service.

Safety Information

Batteries and

Make sure the robot is turned off when being transported and kept in its

original packaging if possible.

Charging

If the robot will not be used for an extended period of time, fully charge it, then

turn it off and store it in a cool, dry place. Recharge the robot at least once

every 3 months to avoid over-discharging the battery.

The lithium-ion battery pack contains substances that are hazardous to the

environment. Before disposing of the robot vacuum, please first remove the

battery pack, then discard, or recycle it in accordance with local laws and

regulations of the country or region it is used in.

When removing the batteries from the product, it is better to use up the

batteries and make sure your product is disconnected from power.

1) Uninstall the screw on the bottom, then remove the cover.

2) Unplug the battery connector, then remove the batteries. Do not damage the

battery case to avoid any risk of injuries.

3) Return the batteries to a professional recycling organization.

Laser Safety

The laser sensor in this product meets the IEC 60825-1: 2014 Standard for Class

1 laser products. Please avoid direct eye contact with it during use.

Information

Hereby, Dreame Trading（Tianjin）Co., Ltd. declares that the radio equipment type RLL11GC is in compliance with Directive 2014/53/EU. The full text of the EU

declaration of conformity is available at the following internet address: https://global.dreametech.com

For detailed e-manual, please go to https://global.dreametech.com/pages/user-manuals-and-faqs