Carmanah R820-F Посібник із заміни системи енергоменеджменту - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник із заміни системи енергоменеджменту для Система безпеки Carmanah R820-F. Carmanah R820-F 12 сторінок. Traffic beacon
Також для Carmanah R820-F: Посібник із швидкого старту (20 сторінок)
Друкувати сторінку
ENERGY MANAGEMENT SYSTEM
REPLACEMENT GUIDE
2.0 Energy Management System (EMS) Overview
Relay Control/Monitoring:
EXT1 (also labelled as OUT1 on G Series wiring terminal block) – Used for Applied Information time switches
only. Pulses of voltage (relative to DC-) indicate the system is operating with no detected fault. This "heartbeat" is
used as part of Carmanah's StreetHub system monitoring through the Applied Information time switch.
EXT2 (also labelled as OUT2 on G Series wiring terminal block) – This terminal provides a steady +12 V
(nominal, relative to DC-) signal whenever the fixtures are activated and no faults are detected. This digital output
is commonly used for triggering a relay to power third party devices or overhead lighting while a fixture is active. It
is also used for certain push button applications.
5
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |
|
carmanah.com