Andatech AlcoSense PRO Посібник користувача - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник користувача для Випробувальне обладнання Andatech AlcoSense PRO. Andatech AlcoSense PRO 9 сторінок. Personal breathalyser
Dear customer
Congratulations on buying your new AlcoSense Pro breathalyser.
Now, if you are drinking, you are more aware of your alcohol level before you get
into the car and possibly drive dangerously.
We hope you enjoy owning your AlcoSense Pro breathalyser. If you have any
questions regarding the unit or want to speak with us further, please visit
andatech.com.au or call 1300 800 200 (between 9am and 5pm Monday to Friday).
Instructions must be followed to ensure accurate test results. This unit can be
operated in Normal Mode and Fast Mode, as described below.
When the unit is turned off, press and hold the Power Switch. The unit will display
the last number of tests,
displays
to operate the unit in Normal mode, or release it when it displays
to operate it in Fast mode.
Normal Mode Operation
Step 1:
Wait 20 minutes after your last alcohol drink. It takes approx. 20 minutes
for alcohol to have an effect on your system and for residual alcohol
remaining in mouth to dissipate.
Step 2:
Attach the mouthpiece to the unit. Press and hold the Power Switch.
Step 3:
Release the Power Switch when displaying
counts down from
Step 4:
The unit will beep twice and a yellow light will appear beside "READY" to
indicate it is ready for you to start. Begin blowing through the mouthpiece
into the unit for 5-10 seconds or until the unit beeps twice.
You will see the unit displaying the digit
analysing the sample.
Step 5:
After analysis is complete, you will see the blood alcohol concentration
(BAC) results displayed. The result will be displayed for 15 seconds
before automatically turning off.
Once your blood alcohol level is above the legal limit, the "WARN" light will flicker
along with the alarm sound.
and
. Release the Power Switch when it
to warm up.
and wait while the Pro
moving left to right as it is