Andatech PRODIGY 3 Посібник користувача - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник користувача для Випробувальне обладнання Andatech PRODIGY 3. Andatech PRODIGY 3 14 сторінок. Industrial breathalyser
WIFI
1. Enter the WI-FI information to connect to the WIFI.
Setting
1. Basic Settings
Adjust the screen brightness level and sleep time.
2. Time Setting
Set the device date and time.
3. Print
• Print GPS: Tick the checkbox to print the GPS location
of the test on the printout.
• Print Photo: Tick the checkbox to print the photo of
the subject on the printout.
4. Device Info
Displays the device information such as the software
version number, next and last calibration date, and total
number of tests.
5. Upload
If a backend server is used for data upload, the IP
address of the server is shown (IP address can only
be changed in Advanced Settings). Set Auto Upload if
needed.
6. Advanced
Only authorised calibration technicians can enter the
device's Advanced Settings.
7. Skip Data Entry
Tick this checkbox to skip entering data before each
Standard Test. Untick to re-enable entering data.
9