Formula Air RS-EXL Посібник з технічного обслуговування - Сторінка 12
Переглянути онлайн або завантажити pdf Посібник з технічного обслуговування для Блок управління Formula Air RS-EXL. Formula Air RS-EXL 15 сторінок. Ex rotary valve
Друкувати сторінку
9. TROUBLESHOOTING
Failure
Rotary valve
switches off
thermally
Rotary valve is
not running
Rotary valve
makes
"screaming"
sound
The material will
not pass the valve
without
accumulation
Possible causes
- Foreign body got stuck
- Rotor frozen
- Gear motor defective
- Rotor defective
- Motor protection set incorrectly
- Fuse defective
- Big voltage drop in power supply
- Working switch is off
- Motor protection switched of
thermally
- Conditions of operation are not
met in the control system
- Fuse defective
- Foreign body got stuck
- Rotor/rotor housing defective
- Volume of material per time unit in
periods larger than planned
- Airflow opposite through the
valve prevents proper material
flow
- Settling velocity of material less
than expected
- The material accumulates in
lumps which cannot pass
- The material is not removed fast
enough at the outlet of the valve
Proposed solutions
- Remove foreign body
- Thaw on the outside with hot
air or water
- Replace the gear motor
- Replace the rotor
- Adjust the motor protection
- Replace the fuse
- Replace the cables to a larger
square
- Stop the installation, switch on
the working switch
- See " Rotary valve switches off
thermally"
- Investigate why conditions are
not met
- Replace the fuse
- Remove foreign body
- Replace defective part
- Reduce the volume of material
feed, e.g. at chain filter.
- More frequent regeneration
- Shorter step‐interval of chain
conveyor
- Replace sealing lamellae
- Adjust the production machine to
change the flow of material
- Check the function of the
emptying system
11