Advanced Keys AK-104 Посібник з монтажу - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник з монтажу для Пульт дистанційного керування Advanced Keys AK-104. Advanced Keys AK-104 11 сторінок. Smart keyless entry system

Друкувати сторінку

WARNING AND SAFETY INFORMATION

PRODUCT SAFETY AND LEGAL DISCLAIMER

• This product shall be installed by a certified technician therefore a certain level

of competence and knowledge are therefore assumed when reading this guide.

• This guide is provided as a GENERAL installation instructions and vehicle

subjected to installation maybe different.

• This product is designed based on vehicle regulatory standard. Please observe

your local public road traffic law and regulations prior to installation.

• Exercise due-diligence when installing this product. The manufacturer and

distributors of this product will not accept any vehicle damage or personal

injury resulting from the installation of this product. Installation of this product is

acceptance of this statement and releases the manufacturer/distributors of this

product from any direct or indirect liabilities.

• Once installation is complete, please return this guide along with other

documentations included in this product back to customer for future reference.

The manufacturer/distributors of this product does not guarantee this particular

version will be available at a later date.

PRE-INSTALLATION CONSIDERATIONS

• Carefully read and understand the User Manual, Installation Guide and

Electrical Service Information for the subjected vehicle before begin work.

• Install in a well-lit, dry, covered area away from the elements and keep at least

one window open all time during installation. Do not leave key inside ignition

switch and /or detection range. Prepare all tools required for the installation.

Special tools maybe necessary depending on vehicle.

• Verify the vehicle has proper grounding and does not have any outstanding

electrical/functional issue prior to installation.

• To avoid short circuit, it is recommended to pull-out related fuses before

installation and put them back when installation is complete.

• Only locate necessary wires related to the installation (most required wiring are

under driver dash/kick panel areas) and connect to the unit according to the

wiring diagram. Use a Multimeter to verify and confirm

before connecting or disconnecting. We strictly prohibit testing or modifying

• Begin function tests on the system after verifying and ensuring all wires have

been connected correctly and insulated properly.

DO NOT power up the module before it is properly grounded.

Should the unit be powered before being grounded, serious

CAUTION

systems.

damage to internal components could occur.