CommScope FACT-FRACCFOPL Інструкція з монтажу - Сторінка 2
Переглянути онлайн або завантажити pdf Інструкція з монтажу для Промислове обладнання CommScope FACT-FRACCFOPL. CommScope FACT-FRACCFOPL 8 сторінок. Fanout fixation kit
Друкувати сторінку
TC-40152-IP-EN
Rev B, May 2019
www.commscope.com
Contents
1.
General product information ................................................ 2
2.
Warnings and caution ............................................................ 2
3.
Kit Content...............................................................................3
4.
Mounting Fanout Fixation Plate ........................................... 4
1.
General product information
The FACT fanout plate (FOPL) is designed to fixate up to thirty two incoming fanout cables in the cable side duct.
The kit includes one fanout fixation plate with fasteners and fixation components for eight fanout fixations.
2.
Warnings and caution
•
Fiber optic cables may be damaged if bent or curved to a radius that is less than the recommended minimum
bend radius. Always observe the recommended bend radius limit when installing fiber optic cables and patch
cords.
•
Exposure to laser radiation can seriously damage the retina of the eye. Do not look into the ends of any optical
fiber. Do not assume the laser power is turned off or that the fiber is disconnected at the other end.
Page 2 of 8
© 2019 CommScope, Inc. All Rights Reserved
FACT FRAME FANOUT FIXATION KIT
Installation Instructions
5.
Fanout Retainer ...................................................................... 5
6.
Routing Fanouts...................................................................... 7
7.
Trade-marks ............................................................................ 8
8.
Contact Information................................................................8
860648300
Rev. B