Dreamland D3333 Інструкція з експлуатації Посібник з експлуатації - Сторінка 8

Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Аксесуари Dreamland D3333. Dreamland D3333 12 сторінок. Luxury velvet heated overblanket

To set the timer, press the timer button (7) (Diagram [D]) and select either 1h or 9h. This will be illuminated
in green on the (3) LED Display (6) (Diagram [D]).
EN
TIMER OFF/STANDBY: When the set time period has elapsed, the overblanket will automatically switch
off and the standby light will be illuminated in blue on the (3) LED display (10) (Diagram [D]). If you wish to
switch your overblanket back on again, press the timer button (7) (Diagram [D]) selecting either 1 or 9 hours.
MANUAL SWITCH OFF BOTH OVERBLANKET AND CONTROL: Switch off the back of your Intelliheat
control (11) (Diagram [D]) to off (O) position.
MEMORY FUNCTION: After using your overblanket for more than 5 minutes, the Intelliheat control will
remember your last temperature setting.
DISCONNECT: To disconnect your overblanket from the mains socket, switch the control to OFF position
on the back of your Intelliheat control (O) (11) (Diagram [D]), and then safely disconnect the plug from the
mains socket (Diagram [B]).
Your overblanket is suitable for washing. Check the washing instructions on the label of your
overblanket to wash it correctly.
WARNING! Always disconnect the appliance from the mains
supply before cleaning or performing maintenance.
BEFORE WASHING OR STORING YOUR OVERBLANKET:
1.
Disconnect the control from the mains socket.
2.
Disconnect the connector (2) from the overblanket by pressing the push buttons at the sides of the control
connector (1) (Diagram [A]).
3.
Ensure that the controls are not connected and none of the wires have worn through the fabric.
4.
It is important to measure the overblanket before washing and check that the dimensions are
approximately the same before drying.
MACHINE WASHING
The overblanket can be machine washed at 40°C on a wool programme.
Only the gentle spin cycle is to be used. DO NOT use an extra spin cycle.
TUMBLE DRYING
Tumble dry at a low temperature.
DO NOT use the overblanket until it is completely dry.
HANGING THE OVERBLANKET OUTSIDE TO DRY
The overblanket must be stretched back to approximately its original size during the drying process.
This is best done whilst damp, working from side to side, stretching a piece at a time. This procedure
may need to be repeated a few times until fully dry.
Make sure the wires are not kinked or twisted. It is easier to check the wires by placing the overblanket
against the light.
If problems arise with the wires after having dryed the overblanket or if it does not return to its original
size, return it to our authorised Service Centre for a safety check.
WARNING! Examine the appliance against the light to make
sure the cables are not bent or twisted.
6
MI002689_D33.indd 6

CLEANING AND MAINTENANCE

30/03/17 16:06