Dreamland F2016 Інструкція з використання Посібник з використання - Сторінка 7

Переглянути онлайн або завантажити pdf Інструкція з використання Посібник з використання для Аксесуари Dreamland F2016. Dreamland F2016 12 сторінок. Luxury heated throw

Друкувати сторінку

•

READY TO RELAX temperature to pre-heat the throw

•

1-5 temperatures for continuous use

Connect the control connector into the throw socket then plug into the mains

socket (Diagram [A]).

Switch on your Intelliheat throw from the back of the control (Diagram [C] (11)),

by positioning the switch ON (I). The temperature setting (Diagram [C] (4))

will default to the last one used, providing it has been set to that number for a

period longer than 5 minutes.

WHEN USING YOUR THROW, PRESS THE READY TO RELAX FAST PRE-

HEAT BUTTON, THEN AFTER 5 MINUTES, WHEN YOU ARE READY

TO SETTLE DOWN, SELECT A SETTING FROM 1 TO 5 TO FIND YOUR

PREFERRED CONTINUOUS USE TEMPERATURE.

READY TO RELAX FAST PREHEAT: Press the Ready to relax, fast pre-heat

button on the front of the control (8) (Diagram [C]). The ready to relax icon will

be illuminated in red (Diagram [C] (5)) on your LED Display. Your throw will be

lovely and warm in just 5 minutes.

TO SET FOR CONTINUOUS USE: RELEASE the Ready to relax fast pre-

heat button, and press the temperature button (9) (Diagram [C]) to select

your preferred temperature setting from 1-5. This will be illuminated in orange

on the (3) LED display (Diagram [C] (4)).

For continuous use, set the control unit to temperature

levels 1 to 5 only.

DO NOT set the control unit to a higher temperature than

recommended for continuous use.

If the control is set to a higher temperature the user may

suffer skin burns or heat stroke

WARNING!

or under the sheets when in use.

1 OR 9 HOURS AUTO SHUT OFF TIMER: FOR CONTINUOUS USE ONLY

- The Intelliheat control has an AUTOMATIC SHUT OFF TIMER. To set the

timer, press the timer button (7) (Diagram [C]) and select either 1h or 9h. This

will be illuminated in green on the (3) LED Display (6) (Diagram [C]).

DO NOT place the control unit under the pillow