Dreamland R7615 Інструкція з використання Посібник з використання - Сторінка 7

Переглянути онлайн або завантажити pdf Інструкція з використання Посібник з використання для Нагрівальна подушка Dreamland R7615. Dreamland R7615 12 сторінок. Boutique hotel 200 thread count cotton heated mattress protector

Друкувати сторінку

the control unit to the mattress protector.

• For the dual controls models, repeat this for the other side.

• Run the control unit cable along the floor next to the bed. Do not squash the control

unit cable between the mattress and the bed frame.

• Insert the plug of the control unit cable in the mains socket (3). Every time the plug is

inserted, the control unit automatically performs a self-diagnosis, lighting up all LEDs

(10, 11) in a clockwise sequence for around two seconds.

SWITCHING ON AND SELECTING THE RIGHT TEMPERATURE

The control unit can be set to the following temperature levels:

6: Fast pre-heat temperature

5-4: Medium pre-heat temperature

3-1: Continuous or all-night use

• To switch the mattress protector on press the ON/OFF button (7). Every time the appliance is

turned on, the control unit automatically checks the appliance is working correctly, lighting up

all LEDs (10, 11) in a clockwise sequence. Following this check, the control unit automatically

sets to temperature 6 and the auto shut off timer to 1 hour.

• For fast pre-heat, use maximum temperature 6. If you like a medium pre-heat temperature,

then you can select 4-5 by pressing the temperature selector button (8) until the LED for

the required temperature lights up (11). The higher the number selected, the higher the

temperature.

IMPORTANT: The temperature of the mattress protector must be evaluated by lying in

the bed rather than just feeling it by hand.

CONTINUOUS OR ALL NIGHT USE

For continuous or all night use of the appliance, set the control

unit to temperature levels from 1 to 3 only.

To set the control unit to the continuous use temperature, press the temperature selector button

(8) until LEDs 1, 2 or 3 light up (11).

DO NOT get into bed with the control unit set to a higher

temperature than recommended for continuous use.

If the appliance is slept on with the controls set to a higher

temperature the user may suffer skin burns or heat stroke.

WARNING!

or under the sheets when in use.

MI003584_R76.indd 6

DO NOT place the control unit under the pillow

02/04/20 17:22