Electrolux ZHTAROW Посібник користувача - Сторінка 13
Переглянути онлайн або завантажити pdf Посібник користувача для Посудомийна машина Electrolux ZHTAROW. Electrolux ZHTAROW 16 сторінок.
Друкувати сторінку
•
To stop the wash cycle, just press the selected cycle
button or leave the hood.
•
To continue the wash cycle, just press the selected
cycle button or close the hood. The cycle starts again
from where it stopped.
•
At the end of the wash, the dishwasher emits a series
of beeps and "END" blinks on the display:
lift the hood and remove the rack containing the
clean dishes.
ATTENTION
The appliance will not remove burnt food deposits
from dishes. Dishes with burnt-on food deposits
should be cleaned mechanically/chemically (for
example, pre-wash under running water) before
putting them in the dishwasher.
ATTENTION
The use of "foaming"/non-specific detergents or in
any case detergents used in different ways from
that prescribed by the manufacturer, can cause
damage to the dishwasher and compromise wash-
ing results.
ATTENTION
Failure to remove the residuals of detergent possi-
bly used for manual prewash can cause malfunc-
tioning of the dishwasher and compromise
washing results.
Change the water in the tank at least once a day.
Type of racks and loading
•
YELLOW rack: for 18 plates with maximum diame-
ter of 240 mm.
Figure 18
•
GREEN rack: for 12 bowls with maximum diameter
of 240 mm.
Figure 19
•
BLUE rack for glasses: the glasses should be
placed upside down.
Figure 20
•
YELLOW container for cutlery: insert 15 items, with
the handles pointing downwards, in each container.
Figure 21
•
Available as accessories: dividers for glasses and
rack for dishes with maximum diameter of 320 mm.
Note: if only one type of dish rack is to be used, it is
advisable to choose the GREEN rack.
C4
END OF WORK AND DAILY CLEANING
The appliance is designed to carry out an automatic
cleaning cycle to help flush out any residues and to
guarantee greater health and hygiene:
•
Lift the hood and take out the rack containing the
clean dishes.
•
Remove the tank filter "C" and the overflow "W" to
drain the water from the tank.
W
Figure 22
•
Close the hood.
•
Select the drain cycle by pressing button "B"
(Figure 17).
C
15