Fornax 100 Посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача для Аксесуари Fornax 100. Fornax 100 14 сторінок. Equatorial large telescope mechanics

Assembling and preparing the mechanics for use

The first step in assembly is to fix the support disc (column top) for the mechanism to the pre-set

pillar of the appropriate size and load capacity by means of Allen screws through the hole in such a

way that the notch used for horizontal adjustment is located in a northerly direction.

For proper operation, try to position the washer as horizontally as possible and orient it

as accurately as possible according to the cardinal points.

In the next step, tighten the fixing bolts of the washer (pillar top).

The next step is to lift the mechanism onto the washer.

Attention! Due to the heavy weight of the mechanics, pay attention to the number of

persons allowed to lift and/or the load capacity of the hoist, crane, hoist.

The height of the pillar may require the prior installation of a safety mounting platform. When

setting up, pay attention to the safety limits and the load-bearing capacity of the platform, as well

as to a stable, tip-over-free set-up. Mount the mechanism on the pillar in such a way that the

horizontal adjusting nose, rotating around the vertical axis, is positioned in the slit of the support

pillar and faces north.

Mechanics on the washer