DreamLED SPL-500 Посібник користувача - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник користувача для Зовнішнє освітлення DreamLED SPL-500. DreamLED SPL-500 20 сторінок. Solar path led light
Друкувати сторінку
INSTALLATION
This lamp is intended only for outside use.
Choose a stable, solid and supportive surface and make sure the lamp is mounted with
the solar panel faced towards the sun. Mounting height is 3~5 meters.
There are 2 installation options:
1.Wall mount
Using the supplied normal screws
for wall panels or using the supplied
expansion screws for brick walls
Use the supplied screwdriver (side with the hex screwdriver) to loosen the bracket.
•
Adjust the bracket to the appropriate angle and fix the screw tightly.
Pull out the light panel and adjust it to the preferred lighting angle. Fix the screw
•
tightly with the supplied screwdriver (side with the normal screw driver).
Fix the lamp onto the wall or place it on a flat surface using the correct mounting parts.
•
MOTION SENSOR RANGE
Complete detection area is 180°. Actual range of the motion detection sensor depends
on mounting height.
2.Standing on a flat surface
Open the 2 "feet" on the bracket and put
it on a flat surface
-4-