Andersen 40 STE Посібник - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник для Лебідки Andersen 40 STE. Andersen 40 STE 17 сторінок. 2+1 speed
Також для Andersen 40 STE: Посібник (8 сторінок)

Друкувати сторінку
Andersen 40 STE Посібник
6. Remove gear wheel (19) by removing screw (17) and then sliding shaft (18)
upwards.
7. Remove the complete freewheeling ratchet gear
(10-16) by sliding the shaft (9) upwards and
pulling the complete freewheeling ratchet gear
out to the side. (Figure 4)
8. Remove the second freewheeling ratchet gear
(29-35) as in step 7 by removing shaft (28).
9. For base covers (27) in stainless steel remove
10. The base cover (27) by removing the screws holding the base covers to the lower
base (26). For base covers (27) in PETP plastic carefully tap the base cover (27)
from the lower base (26) with a rubber hammer.
11. Reassemble the winch with the new lower base by reversing the procedure above
from 9-3 remembering to apply grease to moving parts.
12. Your winch is ready to be mounted on your new above deck compact motor.
Page 11 of 17
Figure 4
Figure 5