ATI Technologies RADEON 9800 PRO Посібник для початківців - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник для початківців для Комп'ютерне обладнання ATI Technologies RADEON 9800 PRO. ATI Technologies RADEON 9800 PRO 20 сторінок.
Друкувати сторінкуInstalling a RADEON 9800 PRO Mac
Edition
The RADEON 9800 PRO Mac Edition requires
connection to your Mac's internal power supply
for operation. Consult your system
documentation to ensure your system has an
adequate power supply. In order to maintain
enough resources to support the widest range
of other add-in components ATI recommends a
300 watt power supply or greater to ensure
normal system operation.
Connecting to the Hard Drive power
connector
For users living in countries that use the PAL Television
standard see
"NTSC/PAL Support" on page 8.
Use the supplied Power Extension Cable to connect the
RADEON 9800 PRO Mac Edition to the computer's Hard Drive
power connector.
1.
Locate the AGP slot, if necessary, removing the metal
cover:
•
Align your ATI Graphics Accelerator card with the
AGP slot.
•
Press it in firmly until the card is fully seated.
2.
Replace the screw to fasten the card in place.
3.
Connect A of the Power Extension Cable to the RADEON
9800 PRO Mac Edition power connector as shown. (The
cable may already be connected to the graphics card.)
4.
Connect B to the power supply connector.
Note: If there is no spare power connector:
Remove the power cable from the Hard Drive power connector
and complete steps 3 and 4 above.
Connect optional connector to the Hard Drive power connector.
(See inset diagram below.)
6