Communications Specialties FIBERLINK XRD-8050/RK Посібник користувача - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник користувача для Мікрофонна система Communications Specialties FIBERLINK XRD-8050/RK. Communications Specialties FIBERLINK XRD-8050/RK 17 сторінок. Fiber optic linear multidrop rs-232 transmission system for traffic signal controller pplications

to the faulty controller will be affected. The other units in the system will
continue to operate normally. The DIP switch settings are as follows:
• DIP SWITCH 1 ON: 4 seconds
• DIP SWITCH 2 ON: 8 seconds
• DIP SWITCH 3 ON: 16 seconds
Be certain that only one DIP switch is turned ON at any time. All others should
be left in the OFF position.
Master/Local Selection and System Configuration
The XRD-8050 must be user-configured for MASTER or LOCAL operation.
DIP switch settings and an overall system configuration diagram are as follows:
For MASTER Operation: Set DIP Switch 1 and 3 OFF, 2 and 4 ON
For LOCAL Operation: Set DIP Switch 1 and 3 ON, 2 and 4 OFF

Optical Fiber Compatibility

Various versions of the XRD-8050 will successfully operate with most multi-
mode or single-mode optical fibers. These versions are as follows:
XRD-8050-1
XRD-8050-3
XRD-8050-7
XRD-8050-8
Multimode 62.5u Fiber
Multimode 62.5u Fiber
Single-mode 8/10u Fiber
Single-mode 8/10u Fiber
• DIP SWITCH 4 ON: 32 seconds
• DIP SWITCH 5 ON: 64 seconds
• DIP SWITCH 6 ON: Disabled
850nm
1300nm
1300nm
1300nm
7
ST Connector
ST Connector
FCPC Connector
SMST Connector