Andersen A1 Посібник з монтажу - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник з монтажу для Автомобільні аксесуари Andersen A1. Andersen A1 14 сторінок.

Друкувати сторінку
A N D E R S E N
A 1 I N S T A L L A T I O N G U I D E
I N T R O D U C T I O N
A1 PRODUCT FEATURES
Repair work to the Andersen A1 is not
l
permitted and may only be completed
by Andersen or an Andersen trained
expert.
Only pull the charging cable out of the
l
vehicle plug using the charging socket,
never pull the cable.
Ensure that the charging cable is not
l
mechanically damaged (kinked, jammed
or run over).
The Andersen A1 is intended for
l
domestic charging of electric or plug-in
hybrid vehicles.
Product dimensions 345mm(w) x
l
125mm(d) x 490mm(h). Add 8mm to
depth for wood decorative front panel.
Add 65mm to height to allow for top
chamber door opening.
Product weight about 15 Kg depending
l
on variant.
Nominal supply voltage 230V 50Hz.
l
Operating temperature range
l
Nominal charge current settings 16, 20,
l
32 Amps. Supplied set to 32 Amps.
IP64 rated.
l
Set for T2 Mode3 charging.
l
Nominal cable length
l
Courtesy Light
Vehicle charging
Serial Number
cable magic slot
storage
Integral RCD
Plug in control unit to allow
easy removal for equipment
and building maintenance
A
A N D E R S E N
The Andersen A1 has
Vehicle charging socket
storage chamber
Evoflek
extra
TM
flexible charge cable
Status LED's
on front panel
PAGE 2