CarNavi-Tech Mercedes09 Посібник з монтажу - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник з монтажу для Автомобільна навігаційна система CarNavi-Tech Mercedes09. CarNavi-Tech Mercedes09 4 сторінки.

Друкувати сторінку

Take away the PCB, then the LCD panel can

be seen in this way, the Gray metal part

should be removed so that the small PCB

can be located in its location.

（3） Install the daughter board and box：

The Daughter board has already 2 white‐ribbon cable:

The 5CM 60P ribbon should be connected to the

PCB's 60P socket.

The 50P long ribbon should go out to the external

box.

The 60P socket marked with "OUT‐RED" is for the

60P red panel ribbon。

Then the total is like this picture

Then put the PCB, the aluminum shell back.

2 / 4

Then remove the

big aluminum part

Then a 60P white sockect inserted

with RED ribbon cable can be seen,

the interface is inserted between this

ribbon cable and socket.