Dreamline ENIGMA Посібник з монтажу - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник з монтажу для Сантехніка для ванної кімнати Dreamline ENIGMA. Dreamline ENIGMA 12 сторінок. Shower door
Також для Dreamline ENIGMA: Інструкція з монтажу (12 сторінок)
Друкувати сторінку6. Place the Guide block (12) on the floor and parallel it to Stationary glass panel with its
edge flush with the glass vertical edge. Take a measurement to ensure the distance from the
outer surface of the glass to the center line of the guide block is 2 3 /16", hold it firmly and
mark hole positions on the floor. Remove the block, drill the holes in the floor, insert Small
anchors and then secure it onto the floor with Countersunk screw ST4.2×30 (16). See fig.
15 for details.
7. Attach two top Rollers (04) onto the Sliding door (05). Suspend the door by hanging the
rollers onto the Running rail and slide the bottom edge of the Sliding door in the groove of
the Guide block. Adjust the fasteners on both top rollers to ensure that the bottom edge of
the glass does not touch the bottom of the guide block. Then mount two lower Rollers (04)
onto the door to secure the door to the Running rail. Secure it in place. See fig. 16&17 for
details.
8. Push the Threshold cover (14) onto the threshold when the door is in the opened position.
Mount the Handle (06) onto the door. See fig. 18 for details.
9. Push on the Door edge strip (13) on the sliding door and also push on the Anti-water strip
(17) on the stationary glass and the sliding door. See fig. 19 for details.
10. Adjust both Stoppers (01) to ensure that they are positioned upright and the door is in its
maximum opening and closing range. See fig. 20 for details.
11. Seal with silicone between threshold and floor and between glass panels and walls. See fig.
21 for details.
Rev. 1.1.
Shower Enclosure Plan
5