Community C6 Посібник з монтажу та експлуатації - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник з монтажу та експлуатації для Спікери Community C6. Community C6 20 сторінок. 4.5", 6.5", 8" full-range c series coaxial ceiling loudspeakers
Також для Community C6: Посібник з монтажу та експлуатації (16 сторінок)
Друкувати сторінку
Thank you for selecting the Community
Commercial Design Series™ of ceiling loud-
speakers. Whether you chose them because
they deliver exceptionally high quality sound,
because they have predictable, uniform cover-
age so spaces are easy to lay out, because they
are easy to install and save time, or because
they are very competitively priced for such a
high-performance loudspeaker, you can have
con idence you made the right choice.
The Commercial Design Series is built to
satisfy safety agency standards, with quality
assured by Community's long history of build-
ing high-performance, durable loudspeakers
for sound reinforcement and contracting ap-
plications.
The Commercial Design Series is comprised
of these models:
Model
Diameter
C4LP
4.5"
C4
4.5"
C6
6.5"
C6-B
6.5"
C8
8.0"
Each model is delivered as a pair of loud-
speakers, fully assembled, and including
everything needed for standard installations.
These are true coaxial loudspeakers. This
means they have a real compression driver
concentrically arranged so that the upper
frequencies emerge through the center of the
low-frequency driver's magnetic structure
and cone via a precisely tapered Tru-Phase™
high-frequency waveguide. This special
construction provides consistent, wide dis-
persion right up to 16 kHz, all but eliminating
high-frequency narrowing. You don't have the
re lection and diffraction problems at mul-
tiple frequencies found with "straight tube"
coaxial loudspeakers, simple "whizzer-cone"
loudspeakers, or front-mounted soft dome
high frequency loudspeakers (typically found
in ceiling speakers at this price point) that at-
tempt to emulate a true coaxial design.
Community does not use OEM or off-the-shelf
utility loudspeakers in the Commercial Design
Series. We designed these units from the coil
formers to the back cans. We expended great
effort to achieve a uniform voicing across
Community Commercial Design Series
Introduction
Response
114.3 mm
full-range
114.3 mm
full-range
165.1 mm
full-range
165.1 mm
full-range
203.2 mm
full-range
Installation and Operation Manual
all models in this series so that you can mix
sizes to optimize the layout without having
disconcerting changes in sound quality. If you
require deeper low frequency response, you
can add D10SUB or DS8SUB subwoofers from
the Community Distributed Design Series of
loudspeakers.
Their high power handling, high sensitivity,
and therefore higher overall output capacity
allows this series of loudspeakers to deliver
cleaner sound since they avoid drive-level
related distortion.
The Commercial Design Series saves you
money in several ways. (a) Their powerful
magnetic structures and ef icient coils ensure
high output, which gives you more headroom
per power ampli ier so you can use a smaller
amp that will save you money. (b) These loud-
speakers are very competitively priced and (c)
Community designed this series with place-
through-the-cutout Tile Support Bridge Rails
and their snap-on spacers, and Drop-Stop™
installation assistant tabs.
Since the loudspeaker is pre-assembled in the
back-can with its crossover network, and pre-
wired to an external Euro connector, the in-
staller simply inserts the units into the ceiling
in one smooth push of the hand and they snap
in place. They cannot then fall out, thus leav-
ing both hands free to tighten the two clamp
actuator screws, adjust the front-face power
setting dial, and snap on the grille. The wiring
cover plate also serves to clamp non-conduit
carried wires, and the cover does not need to
be removed for access... it just swings clear.
Because one person on a ladder is easily able
to install the loudspeaker in the ceiling, redun-
dant labor is eliminated. Overall, this saves a
tremendous amount of time and labor during
the installation.
All models in this series accommodate 8-ohm
as well as 70V/100V applications.
We urge you to read these instructions care-
fully and familiarize yourself with the features
and installation methods before you begin
the job. If you have any questions or concerns,
please contact Community.
Page 2