ATIK Cameras Titan Посібник користувача - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник користувача для Камера спостереження ATIK Cameras Titan. ATIK Cameras Titan 10 сторінок.
Також для ATIK Cameras Titan: Посібник із швидкого старту (20 сторінок)
Друкувати сторінку3.5 Power Consumption
Your Atik Titan was designed to have very low power consumption, drawing only 550mA
at 12V DC with the cooler running. It is possible to run the camera without cooling
using the USB power alone. The 2.1mm centre- positive DC input is compatible with a wide
range of 12V DC supplies.
WARNING: If you have purchased the optional mains power adaptor, please
note that it is for indoor or observatory use only.
shock if the adaptor is used in damp environments or outside. If in doubt do not
use the adaptor and consult a trained electrician.
3.6 USB Port
The Atik Titan uses a USB 2.0 high-speed interface, allowing for a full-frame download in
approximately 100ms when using the supplied Artemis Capture application. Artemis
Capture also provides a higher speed "preview" mode, which allows a full frame to be
downloaded in approximately 50ms.
3.7 Cooling
Your Atik Titan is equipped with a Peltier thermoelectric element which cools the camera
to approximately 20º C below ambient temperature. The cooler is only active when the
12V power is applied. After switching on the camera it is advisable to allow at least 2
minutes before taking images, in order to allow the temperature to stabilize.
4. Technical Information Summary
Image sensor
Resolution
Pixel size (um)
ADC
Readout noise (Typ.)
Cooling Delta
Regulated cooler
Water assist
Maximum exposure
Minimum exposure
Maximum Frame Rate
PC Interface
Power requirements
Backfocus distance
Thread on front
Weight
Mono or OSC
Page 6
There is a risk of electric
Titan
Sony ICX424
659x494
7,4x7,4
16 bit
7e
-20
No
No
Unlimited
0,001s
15 fps
USB2
12VDC, 0.55A
12mm
M42x0,75
350g
Either