Anderson 800HS Посібник із швидкого старту - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Сільськогосподарське обладнання Anderson 800HS. Anderson 800HS 5 сторінок.

QUICK START GUIDE

800HS

When the machine is to be delivered to the user there are steps you must follow to be sure they are

comfortable with wrapping their first bale. These steps are also important if you are doing a live demo.

Setup is very important to bale size as this machine is not set to a specific bale at the factory.

1) Know your bale size before you start. Asking can help but an actual measurement of

the bale is sometimes necessary.

2) Be sure that everything is greased (if left for more than 3 months outside without use

the machine needs to be fully greased and oiled.

3) Your remote control is charged and tested operational (see user manual on machine for

functions).

The stretcher pole has 6 positions. Be sure that the position is

not over the height of the bale or under it. (this part could have

been removed for shipping so be sure to install it correctly for

wrapping bales)

Put plastic in the

stretcher. There is only

one way to put the plastic

through. See the diagram

to the left. This is a

sticker found on the

machine as well.

Set the cone rollers for the size of

your bale.