Anderson Fusion720 Посібник із швидкого старту - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Сільськогосподарське обладнання Anderson Fusion720. Anderson Fusion720 14 сторінок.
Друкувати сторінку
Back to
inline
•
To install your first roll of plastic you must have the stretcher on the side of the machine
with the door that has a latch. To move the hoop you need to start the machine and
follow the below steps.
1) Start the engine
2) Release the mechanical brake from the hoop wheel.
3) Adjust the hoop speed control on the dash to 3.
4)Press the button on the control panel to move the hoop to the desired position
panel)
line #15
**For inline mode: Press the button to move the hoop so that the second stretcher is
at a conveinent plase to load the plastic.
**For individual wrapping mode: Press the button on the control panel once to
automatically place the stretcher in the correct place to load the plastic.
5) Stop the engine.
Repeat the steps for the first roll of plastic to load the second roll. When finished you must close the
hoop door securely as you will not be able to start the machine electronically with the door open.
Install Plastic rolls
(contrl panel)
Back to
individual
line # 7
(control