Bosch PHG 630 DCE Оригінальна інструкція з експлуатації - Сторінка 7
Переглянути онлайн або завантажити pdf Оригінальна інструкція з експлуатації для Сушарка Bosch PHG 630 DCE. Bosch PHG 630 DCE 12 сторінок. Hot air gun
Також для Bosch PHG 630 DCE: Оригінальна інструкція з експлуатації (12 сторінок)
Друкувати сторінку
OBJ_BUCH-1348-001.book Page 14 Tuesday, January 25, 2011 1:51 PM
14 | English
Technical Data
Hot Air Gun
Article number
Rated power input
Air flow
Temperature at the nozzle outlet
(approx.)
Temperature-measuring accuracy
– at the nozzle outlet
– on the display
Display operating temperature*
Weight according to EPTA-Procedure
01/2003
Protection class
* The display can turn black when not within the operating temperature.
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries,
these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines
may vary.
Operation
Starting Operation
Observe correct mains voltage! The voltage
of the power source must agree with the
voltage specified on the nameplate of the
machine. Power tools marked with 230 V
can also be operated with 220 V.
Switching On
PHG 500-2: Press the On/Off switch 4 to posi-
tion I or II.
PHG 600-3: Press the On/Off switch 4 to posi-
tion I, II or III.
PHG 630 DCE: Press the On/Off switch 5 to po-
sition I, II or III.
1 609 929 X70 | (25.1.11)
PHG 500-2
0 603 29A 0..
0 603 29B 0..
W
1600
l/min
240/450
250/350/500
°C
300/500
±10 %
–
°C
–
kg
0.75
/II
Thermal-protection shut-off: In case of over-
heating (e.g. due to air build-up), the power tool
automatically shuts off the heating system, but
the blower will continue to run. When the power
tool has cooled down to the operating tempera-
ture, the heating system is automatically
switched on again.
Switching Off
PHG 500-2/PHG 600-3: Press the On/Off switch
4 to position 0.
PHG 630 DCE: Press the On/Off switch 5 to
position 0.
PHG 600-3/PHG 630 DCE: After working for a
longer time with high temperature, allow the
power tool to cool down by running it in the cold
air setting I before switching off.
PHG 600-3
PHG 630 DCE
0 603 29C 7..
1800
2000
150/300/500
50/400/600
50–630
±10 %
±10 %
–
±5 %
–
0...+50
0.8
0.9
/II
/II
Bosch Power Tools