Bosch WQG245A0GB Посібник користувача та інструкція з монтажу - Сторінка 37
Переглянути онлайн або завантажити pdf Посібник користувача та інструкція з монтажу для Сушарка Bosch WQG245A0GB. Bosch WQG245A0GB 48 сторінок.
Друкувати сторінкуPull out the condensation con-
5.
tainer horizontally and empty it.
Pour approx. 1.5 litres of hot
6.
mains water into the condensation
container.
Carefully swivel the condensation
7.
container horizontally and empty it
to rinse out any remaining appli-
ance care product.
Continuing the intensive
appliance care programme
Pour approx. 1.5 litres of hot
1.
mains water into the condensation
container.
Hold the filled condensation con-
tainer level so that no liquid spills
out.
Insert the condensation container
2.
so that it locks into place.
Press Start/ Reload .
3.
a The appliance care programme
continues.
a "End" appears on the display and
a signal tone sounds once the ap-
pliance care programme has
ended.
Pull out the condensation con-
4.
tainer horizontally and empty it.
If you drain the condensation using
5.
the drain hose, remove the stopper
from the underside of the condens-
ation container and insert it into
the recess in the top of the con-
densation container. → Page 35
Insert the condensation container
6.
so that it locks into place.
Switch off the appliance.
7.
→ Page 30
Cleaning and servicing en
Cleaning and servicing
16 Cleaning and servi-
cing
To keep your appliance working effi-
Cleaning and servicing
ciently for a long time, it is important
to clean and maintain it carefully.
16.1 Tips on cleaning and
care
Wipe down the
housing and the
controls with
nothing but water
and a damp
cloth.
Remove all de-
tergent residue,
spray residue or
other residues
immediately.
Leave the appli-
ance door open
after use.
16.2 Moisture sensor
The moisture sensor in this appliance
measures how damp the laundry is
during the drying cycle. The appli-
ance changes the duration of the
automatic programme depending on
the residual moisture in the laundry.
Cleaning the moisture sensor
Over time, residue from limescale,
detergents and care products can
build up on the moisture sensor.
Clean the moisture sensor regularly.
This ensures the
parts of the appli-
ance will remain
clean and hy-
gienic.
Fresh deposits
are easier to re-
move without
leaving any
residue.
This allows the
residual water to
dry, reducing
odours in the ap-
pliance.
37