Airtame Airtame 2 Посібник з розгортання - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник з розгортання для ТВ-тюнер Airtame Airtame 2. Airtame Airtame 2 16 сторінок.
Також для Airtame Airtame 2: Посібник з монтажу (8 сторінок)

Друкувати сторінку
 
Installation and Powering Airtame 
● Airtame is powered via Aircord, which is plugged into the device's USB-C port. 
● Airtame needs 2.5 Amps of power to work.  
● It can not be powered using over cables or USB ports. 
● To extend Aircord, the Airtame Infinity Cable must be used. 
● You can use VGA and DVI adapters, as well as HDMI extenders with Airtame. 
 
Powering 
 
● Only use the power adapter that comes in the box.  
● Aircord cannot be extended to provide additional length, the Airtame Infinity cable 
must be used. 
● Airtame 2 is compatible with the Airtame PoE Adapter. 
 
Mounting Airtame 
Airtame 2 provides flexible mounting options for both permanent and non-permanent 
installations. When choosing a spot to place Airtame, remember to: 
1.
Place the Airtame as close to line of sight with the nearest AP as
2.
Place Airtame within 50 feet of an
3.
Use an HDMI-in that is in the direction of the nearest
4.
Avoid placing Airtame 2 behind WiFi blockers such as the TV or
5.
Keep the cabling out of sight by using the adhesive
 
Permanent vs. Non-Permanent 
●
Permanent installations use the adhesive strips of the wall mount and Aircable to secure the 
Airtame 2 to a non-magnetic TV, projector or the wall beside it. 
●
Non-permanent installations only use the magnetism of the wall mount to fix the Airtame to a 
metallic surface of the TV or projector. In such cases, ​ r emember to leave the seal on the 
adhesive pads. 
 
 
 
 
Enterprise Deployment Guide
AP. 
AP. 
strip. 
possible. 
furniture. 
2