Community E200-SAK Посібник - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник для Адаптер Community E200-SAK. Community E200-SAK 2 сторінки. Entasys 200 stand adapter kit

E200-SAK Assembly Instructions

1. The E200-SAK accessory comes with the STAND MOUNT pre-attached

to the UNIVERSAL MOUNT BRACKET as shown above. Check to make

sure the machine screws are fastened securely and/or tighten if

necessary.

2. Slide the E200-SAK accessory onto the loudspeaker column to the

desired position, using the slots along the side of the enclosure.

3. Install and tighten six (6) 3.5 x 16mm Philips truss-head deep thread

screws into the reinforced slots in the enclosure, three on each side of

the loudspeaker enclosure.

mounting positions but the bracket may be mounted at any position

along the length of the column as needed to suit a particular

application.

Community Professional Loudspeakers

333 East Fifth Street, Chester, PA 19013 USA

Phone (610) 876-3400 | Fax (610) 874-0190

E200-SAK Assembly

Note: Pilot holes are factory-suggested

www.communitypro.com

E200-SAK 20121115