ANDERSON-NEGELE NSL-F-02 Посібник з експлуатації - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Аксесуари ANDERSON-NEGELE NSL-F-02. ANDERSON-NEGELE NSL-F-02 20 сторінок. Continuous level sensor.
sensors for food and biopharma.
Також для ANDERSON-NEGELE NSL-F-02: Посібник з експлуатації (20 сторінок)
Друкувати сторінкуNSL-F Series Operating Manual
6.2 Setup using the MPI-200 programming adapter
The software structure of the Simple User Interface is similar to that of the PC version.
The system is operated using two control buttons to the left and right of the display. The button func-
tions are as follows:
Right button, press briefly
Right button, press and hold
Left button, press briefly
Left button, press and hold
Right or left button briefly
Press and hold both buttons
Note:
The abbreviations in column 2 refer to the following programming example.
Menu flowchart to change a parameter
Language
Example of possible display on screen:
Node (19)
Language
English
Node (19)
Language
German
R
Jump to next node, parameter
RL
Edit a node, parameters
L
Jump back to previous node, parameter ...
LL
Leave the editing mode without saving, return
to the next higher level
R/L
scroll up or down
Press both buttons for 10 seconds, then jump
back to the beginning of the menu (attention this is not a re-
set)
Select
(1)
setup mode
(2)
Node (19)
Shows actual
measured values.
Cannot be adjust-
Access
ed.
0 Monitor
Node (19)
Not required for
NSL-F
Access
1 Adjustment
Node (19)
Menu for parameter
setup
Access
2 Setup
Node (19)
Not required for
NSL-F
Access
3 Calibr.
Node (19)
Not required for
NSL-F
Access
4 System
Parameter
(1)
search
(ID search)
(3)
Display
ID search
No
Signal int.
ID search
No
Measure-
ment
ID search
No
7
Select
node/module
(1)
- Display
- Signal int.
- Measurement
(2)
All parameters for
display &
LEDs
Node
Display
All parameters of
the signal interface
(current output)
Node
Signal int.
All parameters for
sensor rod itself
Node
Measure-
ment