CAROL DWR-882 Посібник - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник для Мікрофон CAROL DWR-882. CAROL DWR-882 6 сторінок. Bodypack digital wireless transmitter
Також для CAROL DWR-882: Посібник користувача (16 сторінок)
Друкувати сторінку4. Change the Digital Wireless Microphone Channel
When using wireless microphone, there might be interferences from the signals
transmitted by another wireless microphone or other 2.4G wireless appliances near
by. These disturbances can be solved by selecting a different channel.
Fit the slotted
screwdriver into this
slot.
(1) When changing the channel, it is not necessary to turn the power off. Open the
battery cover, and the channel switch is located next to the battery
compartment. There are 8 channel scales on the switch (as shown in the figure 6),
and another 8 channels can be selected in between scales.
(2) Fitting a slotted screwdriver into the slot, and rotate the switch clockwise or
counter-clockwise to a desired channel. When a new channel is selected, the
microphone connecting LED on the Receiver will blink once, which indicates the
microphone and Receiver are reconnected.
(3) To avoid interference and gain the best result, microphone 1 and 2 should be 8
channels apart. If not applicable, keep at least 2 channels apart.
IV. Troubleshooting:
1. No sound
(1) Check if the power to Receiver is well connected.
(2) If the status LED is not lit when the microphone been switched on, check
whether the batteries are properly installed or have enough energy.
3
figure 5
figure 6
4
When selecting
the channel, aim
the arrow at the
scale or in
between two
scales.