Community Playthings A258 Посібник з експлуатації

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Дитячі та ясельні меблі Community Playthings A258. Community Playthings A258 2 сторінки. Community cubbies

Друкувати сторінку

Product

Guide

User and

Maintenance

Information

IMPORTANT

INFORMATION:

Please save this

product guide.

CUSTOMER SERVICE:

United States

PO Box 2

Ulster Park, NY 12487

Office hours: 9-5 EST

Phone (800) 777-4244

Fax (800) 336-5948

(845) 572-3468

www.CommunityPlaythings.com

[email protected]

JW60 DC 6738 Revision E

Recommended Use

The Community Cubby is designed to pro-

vide a personalized storage space for a

child's belongings. This includes garments,

accessories, and flat storage of papers and

two-dimensional art work. The two spaces at

the top of the cubby are for parent-teacher

communication or children's artwork. This

can be made into a larger space by removing

the plastic divider shelf. Coat hanging and/

or backpack space is below this shelf. A two

point coat hook is provided on either side of

the coat hanging space. At the top of the Coat

Space there is a place for the child's name

and/or picture to be placed over the arch. The

space at the bottom of the Cubby is for totes.

WARNING

c This product is intended for use by children of

immature judgment, therefore supervision is

required at all times.

CAUTION

c For indoor use only. This Cubby is not water-

proof.

Assembly

Your Cubby comes in one carton containing:

1. One Cubby.

2. Hardware for mounting.

3. Packet of label holders and labels.

4. This Product Guide.

Totes or baskets, if ordered, ship in a separate carton.

If your shipment is incomplete, please contact

Customer Service.

Installation Instructions

This item should be fastened securely to the wall or

floor. Enclosed for that purpose are:

1. Four ¾" x #8 oval head screws.

2. Four 1½" x #8 oval head screws.

3. Two 2" corner braces.

Community Cubbies

A250 Compact Toddler Cubby 2

A253 Compact Toddler Cubby 6

A260 Compact Preschool Cubby 2

A263 Compact Preschool Cubby 6

A266 Preschool Cubby 2

A268 Preschool Cubby 4

A226 Kindergarten Cubby 2

A228 Kindergarten Cubby 4

The ¾" screws are for the side or top of the Cubby.

The 1½" screws are for the wall or floor, but if not

suited to the building construction, fasteners appro-

priate to the construction must be used. The corner

braces should be mounted at either of the locations

shown, on both sides of the Cubby. (Fig. A)

WARNING

c Any Cubby configuration must be installed by a

competent carpenter or maintenance person to

ensure stability. Cubbies installed back-to-back

must be fastened together for stability. The

Figure B

Figure A

customer must assume full responsibility that the

Cubby(s) will be secure for the long term.

Plastic Connectors (Fig. B)

Push sides of units together, then pull from front on

one unit to check connection. Cubby units can be

disconnected by pulling units apart with a quick, firm

pull. A clacking noise is normal during disconnection.

Name/Photo Labeling Device

Reach up under the arch with two hands. Push the

clear plastic cover off towards you using your fingers

to push through the holes provided. Find a template

for labels on the Community Playthings website. Put

the new label in the clear plastic cap and press the

cap back in place.

A256 Toddler Cubby 2

A258 Toddler Cubby 4