Caroma Invisi Series II Посібник - Сторінка 13
Переглянути онлайн або завантажити pdf Посібник для Сантехнічний виріб Caroma Invisi Series II. Caroma Invisi Series II 16 сторінок. Urinal concealed cistern
Також для Caroma Invisi Series II: Посібник з монтажу (20 сторінок)
Друкувати сторінку
1
1
- Pre Installation
2
Ball Valve
Flexible Hose
Disconnect Flexible Hose from the Inlet
Valve and the Ball Valve.
5
"click"
Inlet
Valve
Assembly
Lift tab and slide the Inlet Valve Bracket to
the left.
13
1
- With Button Panel
Dust Cover
Panel Assembly
3
Inlet Valve
"squeeze"
Remove the Bridge Assembly by squeezing
tabs front and back to disengage from
locking tabs inside the tank.
6
"click"
Rotate and remove the Inlet Valve.
Removing Internal Components through Access Window
Full Flush
Face Plate
Bridge
Assembly
INVISI
1
- With Blank Access Panel
Panel Assembly
Face Plate
4
Outlet
Valve
Lift the Outlet Valve to disengage from
guide ribs in the base of the tank and lay
over on its side.
7
Lift the Outlet Valve from the base of the
tank, roll forwards and rotate so the button
end comes out first.
NOTE: Reverse procedure to reassemble.
™
SERIES II
Blank Access
Panel