Caroma Invisi Series II Посібник з монтажу - Сторінка 18
Переглянути онлайн або завантажити pdf Посібник з монтажу для Туалети Caroma Invisi Series II. Caroma Invisi Series II 20 сторінок. Urinal concealed cistern
Також для Caroma Invisi Series II: Посібник (16 сторінок)
Друкувати сторінку
Servicing Requirements
Troubleshooting Guide
Spare Parts Information
Maintenance & Spare Parts Instructions
1
Ensure mains water is turned off and
remove Inlet Valve from cistern as per the
instructions on page 17.
3
Seal
Remove seal from Cap Assembly.
18
•
Inlet Valve Seal may require periodic cleaning (dependant on water quality).
- procedure as defined below.
•
Inlet Valve is slow to fill OR fails to open ► Ensure tap is open.
•
Inlet Valve fails to close ► Clean & inspect seal as described above, replace Cap Assembly
•
If any other issues arise ► Consult a plumber or Caroma After Sales Service.
•
Caroma Invisi II Inlet Valve compatible Spare Part Kits are:
687 171 Containing - 1 x Complete Unifill Inlet Valve
687 049 Containing - 1 x Cap Assembly
Refer to
- Maintenance & Spare Parts Instructions
2a
Bracket
To replace complete Inlet Valve:
rotate nut & pull to disconnect it from the
Bracket.
4
Wash seal to remove any dirt and inspect
for damage.
& Seal if damaged.
with bayonet connection
- 1 x Seal
Inlet
A
Valve
Servicing - Inlet Valve
Cap Assembly
Seal
2b
B
To clean and inspect seal:
unclip the Adjustment Screw, rotate & pull
to remove cap assembly.
5
C
Helplines
A
Replace seal onto cap assembly.
If necessary replace cap & Seal (Spare Part
Kit 687 049)
Push & rotate to re-attach cap assembly,
re-clip Adjustment Screw and refit into
cistern.
C
Cap
Assembly
A
Adjustment
Screw
B
D