Bosch 4 V-LI Інструкція з експлуатації - Сторінка 8
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Дриль. Bosch 4 V-LI. Bosch 4 V-LI 31 сторінка. Professional
Також для Bosch 4 V-LI: Оригінальна інструкція з експлуатації (7 сторінок), Оригінальна інструкція з експлуатації (10 сторінок), Оригінальна інструкція з експлуатації (7 сторінок), Оригінальна інструкція з експлуатації (48 сторінок), Оригінальна інструкція з експлуатації (14 сторінок), Оригінальна інструкція з експлуатації (15 сторінок)
Друкувати сторінку
OBJ_BUCH-1819-001.book Page 8 Thursday, February 28, 2013 10:57 AM
8 | English
Mounting VAC Accessories (see figure B)
Remove the battery pack from the vacuum cleaner be-
fore maintaining or cleaning, making any adjustments,
changing accessories or placing the vacuum cleaner
aside. This safety measure prevents accidental starting of
the vacuum cleaner.
The vacuum cleaner accessories can be connected directly to
the dust cup 8.
The combination possibilities of the various vacuum cleaner
accessories can be viewed in the figure.
– Connect the vacuum cleaner accessories firmly to the con-
nection at the dust cup 8 and in to each other.
Operation
Remove the battery pack from the vacuum cleaner be-
fore maintaining or cleaning, making any adjustments,
changing accessories or placing the vacuum cleaner
aside. This safety measure prevents accidental starting of
the vacuum cleaner.
Starting Operation
Before vacuuming, ensure that the filter assembly is
assembled securely.
Only use an undamaged filter (no cracks, small holes,
etc.). Replace a damaged filter immediately.
Switching On and Off
To save energy, only switch the vacuum cleaner on when us-
ing it.
– To switch on the vacuum cleaner, press the On/Off button
4.
The LED 2 lights up when the vacuum cleaner is switched
on and enables the illumination of the work area in poor
visibility.
– To switch off the vacuum cleaner, press the On/Off button
4 again.
Adjusting the vacuuming power
After switching on, the "High" vacuuming power stage is set
by default.
– Press button 3 for low vacuuming power.
– To switch back to high vacuuming power, press button 3
again.
Maintenance and Service
Maintenance and Cleaning
Remove the battery pack from the vacuum cleaner be-
fore maintaining or cleaning, making any adjustments,
changing accessories or placing the vacuum cleaner
aside. This safety measure prevents accidental starting of
the vacuum cleaner.
For safe and proper working, always keep the vacuum
cleaner and ventilation slots clean.
– Clean the vacuum cleaner housing from time to time using
a moist cloth.
– Clean soiled charger contacts using a dry cloth.
1 609 92A 04G | (28.2.13)
Cleaning the Dust Cup (see figures C1 –C3)
To maintain the optimum performance of the vacuum cleaner,
clean the dust cup 8 after each use.
– Press release button 1 and remove the dust cup 8 from the
motor housing 7.
Remove the filter assembly 14 from the dust cup.
– Shake/tap out the dust cup 8 over a suitable waste bin.
– If required, clean the dust cup with a moist cloth.
If required, clean the filter assembly (see "Cleaning the Fil-
ter Assembly", page 8).
– Reinsert the filter assembly 14 into the dust cup 8.
Afterwards, hang the dust cup at the bottom into the motor
housing, apply light pressure until the dust cup can be
heard to engage.
Cleaning the Filter Assembly (see figures D1 –D3)
– Press release button 1 and remove the dust cup 8 from the
motor housing 7.
Remove the filter assembly 14 from the dust cup.
– Remove the filter cover 15 from the filter seal 16.
Remove the HEPA filter 17 from filter cover 15.
– Brush off the lamellas of the HEPA filter with a soft hand
brush.
– Assembly is carried out in reverse order.
Malfunctions
In the case of insufficient vacuuming performance, check the
following:
– Is the dust cup 8 full?
▷ See "Cleaning the Dust Cup", page 8.
– Is the HEPA filter 17 clogged with dust?
▷ See "Cleaning the Filter Assembly", page 8.
– Is the capacity of the battery pack too low?
▷ See "Battery Charging", page 7.
Regular emptying of the dust cup 8 and cleaning of the filter
assembly 14 ensures optimal vacuum capacity.
If the vacuuming performance is not achieved thereafter, take
the vacuum cleaner to customer service.
After-sales Service and Application Service
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the vacuum cleaner.
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Bosch Power Tools