Comnet MLS II Посібник з монтажу - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник з монтажу для Трансивер Comnet MLS II. Comnet MLS II 16 сторінок. Mobile radio
Друкувати сторінку•
Easy for the serviceman to service,
•
Out of the way of auto mechanics,
•
Out of the way of passengers, and
•
Protected from damage by water.
Figure 1 – Typical Console/Hump or Dash Mount
INSTALLATION EQUIPMENT
The equipment required for installing the radio includes:
•
An electric drill for drilling mounting holes
•
Drills and circle cutters (see sizes below)
•
A soldering iron for the antenna cable
•
Phillips and PoziDriv
mounting screws
DRILL SIZES
•
No. 27 (9/64-inch) Drill for No. 10 Self-Tapping Screws
•
No. 31 (1/8 inch) Drill for No. 8 Self-Tapping Screws
•
No. 36 (7/64 inch) for No. 6 Self-Tapping Screws
•
3/4-Inch Punch or Holesaw for 800 MHz Antenna (optional)
•
5/8-Inch Punch or Holesaw for rubber grommet
POZIDRIV
Trademark of Phillips International Co.
4
screwdrivers and a 7mm hex head driver for