Comnet MLS II Посібник з монтажу - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник з монтажу для Трансивер Comnet MLS II. Comnet MLS II 16 сторінок. Mobile radio

INSTALLING THE RADIO

Mount the radio so that the controls are within reach of the operator. Use the

mounting bracket as a template to locate the holes and mount the radio as shown

in Figure 4. (Figure 3 provides dimensional data.) Be sure to leave enough room

at the rear of the radio for cable connections. Before attaching the radio in the

mounting brackets, connect the antenna plug, systems plug, and microphone.

Torque radio mounting bolts to 1.58 - 2.14 Newton Meters (14-19 inch pounds).

Do not exceed torque rating.

For passenger safety, mount the radio securely so that the unit will not break

loose in the event of a collision. This is especially important in station

wagons, vans, and similar type installations where a loose radio could be

extremely dangerous to the vehicle occupants.

Figure 2 - System Cable Interconnect

Figure 3 - Mounting Dimensions

WARNING