ATL Berkshire 600 AG Посібник користувача - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник користувача для IP-телефон ATL Berkshire 600 AG. ATL Berkshire 600 AG 13 сторінок.
Друкувати сторінкуADJUSTING YOUR RINGER-vOLUME
The ringer volume is controlled by a 3 position
switch located at the rear of the telephone,
and indicated by the word 'ringer'. Moving
through the settings from left to right they
are HIGH, MED and LOW.
ADJUSTING YOUR RINGER pITCH
The ringer pitch control is also a 3 position
switch located at the rear of the telephone,
and indicated by the words 'RINGER
pITCH'. Settings from left to right are HIGH,
MED and LOW.
MAKING A CALL vIA THE HANDSET
►
pick up the handset and listen for
dial tone
►
Dial the required telephone number
(Note: making external calls from a
company exchange (PABX) requires
the number to be prefixed by an access
digit, notmally '9')
Using your
Berkshire 600 AG
with Handsfree
Whether it's having both hands available,
or conference calling with colleagues, the
speakerphone feature of the Berkshire
600 AG is seen by many as a valuable
benefit. Operation is via the HANDSFREE
key, (providing the handset is left in place).
Speaker volume may be adjusted via the [+]
and [-] keys.
Using your
Berkshire 600 AG
with a Bluetooth
Headset
FUNCTION
BLUETOOTH
®
The ATL Berkshire 600 AG can allow a
maximum of two Bluetooth
paired at any one time and will maintain a
connection to the activated device providing
it's available, i.e. switched on and within
service range. Once you select a paired
headset as the working headset, and the
headset is turned on, the telephone can
detect the headset status automatically,
this means that if the headset is turned off,
running out of battery or out of service range
the telephone can detect there's no headset
available. The telephone will attempt to
reconnect to this headset providing the
user hasn't selected an alternative headset,
the telephone can detect the headset as
available immediately when its switched on,
or an out of range headset is back within the
telephone service area.
With the ATL Berkshire 600 AG in the "On-
Hook" mode, the [MUTE] key is defined as
the [pAIRING] key, which can activate the
pairing mode, cancel the pairing mode or
clear the paired list.
When the ATL Berkshire 600 AG is in the "On-
Hook" mode, the [VOLUME-] key is defined
as [1st HEADSET] key and [vOLUME+] key
acts as the [2nd HEADSET] key, you can use
these two buttons to select which headset
should be used as the active headset.
®
headsets to be
®