ATL Berkshire 600 AG Посібник користувача - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник користувача для IP-телефон ATL Berkshire 600 AG. ATL Berkshire 600 AG 13 сторінок.
Друкувати сторінкуLCD CONTRAST
Whether mounting the Berkshire 600 AG
on a wall or simply sitting on a desk, it
may be necessary to adjust the display
viewing angle. One of 4 selections can be
programmed;
press the SET key.
►
press one of the 2 navigation keys
directly below the display.
►
press the desired numeric key
(1~4).
Typically viewing angles 1-3 are selected
for desktop use, and 4 for wall mount
applications.
press SET to save the selection.
LCD TIME + DATE ADJUSTMENT
►
press the SET key.
►
press the CLOCK key and observe
the flashing 24 hour numbers in
the top left position of the display.
Changing this number is done by
direct numeric key entry. Upon entry
of the second character, the cursor
will automatically move to the next
data entry location.
Upon completion of time, date and year
information, press SET to save changes in
the memory.
SWITCHABLE MESSAGE WAITING
There are three versions of message waiting
indication supported within the Berkshire 600
telephone (MW 3, 8 and 10). This selection
is made via a 4 position switch located to
the rear of the telephone, indicated by the
letters 'MW'.
A 'Ring Indicator' position is provided that
has the additional benefit of being activated
by short ring burst MW signals - see website
for details.
In all cases, an LED in the top right hand
corner of the telephone is used to indicate
the selected functions and incoming calls.
Any questions you may have should be
directed in the first instance to your telephone
supplier with details of your pABX.
Further concerns may also be addressed
by calling our Technical Support Dept. or
visiting our website, www.atltelecom.com
MODEM pORTS
Your Berkshire 600 AG comes with two
modem ports (BS6312 and RJ11) typically
used for a pC modem, or as points of
connection for additional telephones.
HEARING AID COMpATIBILITY
For hearing aid users, an inductive coupler
has been installed in the handset of the
Berkshire 600 AG, to improve audible
efficiency.
Installation Notes
MESSAGE WAITING
MW3 is used by systems that use high
voltage DC signalling. MW8/10 however
use line reversal methods to indicate that a
message is present.
pAUSE TIME ADJUSTMENT
The 'PAUSE' key may be configured via
the keypad to represent 1 of 4 time periods
(1~4 sec.). In all cases, lift the handset,
press SET, pAUSE, followed by a numeric
key (1~4) to set the pause time, replace