COMNET ERICSSON PANTHER 300M Посібник з монтажу - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник з монтажу для Радіо COMNET ERICSSON PANTHER 300M. COMNET ERICSSON PANTHER 300M 12 сторінок.

INSTALLATION

Figure 1 shows an example of a typical connection diagram. Before

beginning, plan the radio installation carefully so that it will:

! Be safe for the operator and passengers,

! Be convenient for the operator to use,

! Be neat in appearance,

! Be protected from water damage,

! Be easy to service,

! Be out of the way of auto mechanics,

! Be out of the way of passengers, and

! Allow for good air flow around the unit's cooling fins.

For passenger safety, mount the radio securely so the unit will not

break loose in the event of a collision. This is especially important

in station wagons, vans and similar type installations where a loose

radio could be extremely dangerous to the vehicle occupants.

The procedures in this section provide a guideline for installing the

mobile radio. In some applications, it may be necessary to deviate

slightly from the recommended procedure and the order in which the

equipment is installed.

To assure the feasibility of the cable routes you plan to use, it is

suggested that you run the cables before installing the radio. Be sure

to leave some slack in each cable so that the radio may be pulled out

for servicing with the power applied.

It is recommended the unit be installed by one of the many Com-Net

Ericsson Authorized Service Centers located throughout the United

States. Personnel at these centers are experienced in installations of

this type and can provide a safe, neat, and functional installation.

The following tools are required to install the P

300M

ANTHER

Mobile Radio:

•

Electric drill for drilling mounting holes