Electrolux EGH6343 Посібник користувача - Сторінка 11
Переглянути онлайн або завантажити pdf Посібник користувача для Варильна поверхня Electrolux EGH6343. Electrolux EGH6343 20 сторінок.
Також для Electrolux EGH6343: Посібник користувача (20 сторінок)
Друкувати сторінку
Problem
The flame extinguishes im‐
mediately after ignition.
The flame ring is uneven.
7.2 If you cannot find a
solution...
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Make sure,
you operated the hob correctly. If not the
servicing by a service technician or
dealer will not be free of charge, also
A
MOD.
PROD.NO.
SER.NO
DATA
A) Stick it on Guarantee Card and send
this part (if applicable).
B) Stick it on Guarantee Card and keep
this part (if applicable).
8. INSTALLATION
WARNING!
Refer to Safety chapters.
Possible cause
Burner cap and crown are
placed incorrectly.
Thermocouple is not heat‐
ed up sufficiently.
Burner crown is blocked
with food residues.
B
MOD.
PROD.NO.
SER.NO
03 IT
DATA
MADE IN ITALY
Remedy
Place the burner cap and
crown correctly.
After lightning the flame,
keep the knob pushed for
equal or less than 10 sec‐
onds.
Make sure that the injector
is not blocked and the
burner crown is clean.
during the warranty period. The
instructions about the Service Centre
and conditions of guarantee are in the
guarantee booklet.
7.3 Labels supplied with the
accessories bag
Stick the adhesive labels as indicated
below:
C
MOD.
PROD.NO.
SER.NO.
0049
C) Stick it on instruction booklet.
ENGLISH
11
TYPE
IP20