Electrolux EGW9353 Посібник користувача - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник користувача для Варильна поверхня Electrolux EGW9353. Electrolux EGW9353 20 сторінок. 70cm wide gas on glass hob with 4 verticalflame burners and cast iron pan supports.
Друкувати сторінку
www.electrolux.com
8
5. HELPFUL HINTS AND TIPS
WARNING!
Refer to the Safety chapters.
5.1 Energy savings
• If possible, always put the lids on the
pans.
• When the liquid starts to boil, turn down
the flame to barely simmer the liquid.
Use cookware with diameters applicable
to the size of burners.
Triple Crown
Semi-rapid (rear left)
Semi-rapid (front right)
Semi-rapid (front left)
WARNING!
Do not use cast iron pans, pot-
stones, grill or toaster plates on
gas burners.
WARNING!
Make sure that the bottoms of
pots do not stand above the con-
trol knobs. If the control knobs are
under the bottoms of pots, the
flame heats them up.
Do not put the same pan on two
burners.
6. CARE AND CLEANING
WARNING!
Refer to the Safety chapters.
WARNING!
To clean the appliance, deactivate
it and let it cool down first. Before
you clean or do the maintenance
work, disconnect the appliance
from the electrical supply.
Burner
Diameters
of cookware
180 - 260
Rapid
180 - 260
120 - 240
120 - 200
120 - 200
Do not put unstable or damaged pots on
mm
the rings to prevent from spill and injury.
mm
mm
mm
Information on acrylamides
mm
Important! According to the newest
scientific knowledge, if you brown food
(specially the one which contains starch),
acrylamides can pose a health risk. Thus,
we recommend that you cook at the
lowest temperatures and do not brown
food too much.
WARNING!
Make sure that pot handles is not
above the front edge of the cook-
top. Make sure that pots are cen-
trally put on the rings in order to
get maximum stability and to get
lower gas consumption.
WARNING!
Do not use a flame diffuser.
WARNING!
Liquids spilt during cooking can
cause the glass to break
Scratches or dark stains on the
surface have no effect on how the
appliance operates.
WARNING!
A high concentration of moisture
or immersion of the burners in wa-
ter for too long can cause damage
to their surfaces.