Andon KD-926 Посібник з експлуатації - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Монітор артеріального тиску Andon KD-926. Andon KD-926 19 сторінок.

DN:KD-926-SMSY01 V1.0

 Do not move your arm, body, or the monitor and do not move the rubber

tube during measurement.

 Stay quiet, calm for 5 minutes before blood pressure measurement.

 Please keep the cuff clean. If the cuff becomes dirty, remove it from the

monitor and clear it by hand in a mild detergent, then rinse it thoroughly in

cold water. Never dry the cuff in clothes dryer or iron it. Clean the cuff after

the usage of every 200 times is recommended.

6. BODY POSTURE DURING MEASUREMENT

Sitting Comfortably Measurement

a. Be seated with your feet flat on the floor, and don't cross your legs.

b. Place palm upside in front of you on a flat surface such as desk or

table.

c. The middle of the cuff should be at the level of the right atrium of the heart.

Lying Down Measurement

a. Lie on your back.

b. Place your left arm straight along your side with your palm upside.

c. The cuff should be placed at the same level as your heart.

a. After applying the cuff and your body is in a comfortable position, press the

"START/STOP" button. All display characters are shown for self-test. You can

check the LCD display according to the right picture. Please contact the service

center if segment is

b. Then the current memory bank ( or

button to change over to other bank.

pressing "START" button. The current bank can also be confirmed automatically

after 5 seconds with no operation.

Picture 7-1

c. After selecting the memory bank, the monitor starts to seek zero pressure.

picture 7-4.

d. Then the cuff will be slowly inflated. The blood pressure and pulse will be

measured during inflation. Inflation will stop as soon as the blood pressure and

pulse rate have been calculated and displayed on the LCD. The irregular

missing.See picture 7-1.

Picture 7-2

Picture 7-3

9/16

) is blink.

See picture 7-2.

See picture 7-3.

Confirm your selection by

Picture 7-4

Operation Guide

Press "MEM"

Picture 7-5

See