Compac WD500 G1 Посібник з експлуатації - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Візок на відкритому повітрі Compac WD500 G1. Compac WD500 G1 15 сторінок. Wheel dolly
Operating instructions:
WARNING
Improper use of this wheel dolly may result in injury/pinning of the user and others in close proximity to
the product.
1. When the load is in motion, it is important to stand with both feet behind the machine, with
hands gripping the handles (Figure 1 A) or the lowering handle (Figure 1 E).
2. Use the unit only on a solid, level surface.
3. When transporting a wheel, it must be in the lowest position.
4. The wheel dolly may not be used to lift loads heavier than the stated max. capacity (see
machine plate). Failure to do so can result in injury or property damage.
5. The manufacturer disclaims any responsibility for improper use, alterations in construction, use
of non-original parts and repairs and adjustments made by unauthorized personnel.
6. Do not use the unit if it is leaking oil or if the unit is otherwise functioning differently from when it
was new. If this is the case, have the unit inspected by authorised personnel.
Figure 1
(EN)
5374 WD500 G1 (EN).docx
Knowhow is the difference
Operating positions
Pos.
Item
A
Handle
B
Safety bar
C
Retaining screw for safety bar
D
Height barrier for safety bar
E.
Lowering handle
F
Storage for safety bar
G
Pedal
H
Fork
I
Roller
J
Elevator
5 / 15
Long for dual wheels
Short for ordinary wheels
2020-01-24 R1.1 S1