AirTech Air+ PIV Інструкція з монтажу та введення в експлуатацію - Сторінка 13
Переглянути онлайн або завантажити pdf Інструкція з монтажу та введення в експлуатацію для Вентилятор AirTech Air+ PIV. AirTech Air+ PIV 16 сторінок. Positive input ventilation unit
Також для AirTech Air+ PIV: Інструкція з монтажу та введення в експлуатацію (16 сторінок)
Друкувати сторінку
E. SERVICING AND MAINTENANCE.
WARNING: THE POSITIVE VENTILATIION UNIT AND ANCILLARY
CONTROL EQUIPMENT MUST BE ISOLATED FROM THE POWER
SUPPLY DURING THE INSTALLATION / OR MAINTENANCE
The
fan
motor
lubrication.
Apart from filter change the AIR+PIV contains no user serviceable parts.
Filter: Under normal conditions, i.e. away from main roads and industrial
areas, it is recommended that the filter is checked annually and cleaned or
replaced as necessary.
below)
The filter may be gently cleaned with a vacuum cleaner or washed in a soapy
water solution and allowed to air dry before re-fitting.
filter in a tumble dryer.
When re-fitting make sure that the filter is fitted correctly. This will
ensure that all the fresh air entering the dwelling has passed through the
filter first.
Below is a list of spares and accessories available for the Air+ PIV:
Spares and Accessories
F7 FILTER PACK
MOUNTING BASE ASSEMBLY
HANGING KIT
REPLACEMENT G4 FILTER PACK
200mm DIAMETER 2m FLEXIBLE DUCTING
REPLACEMENT DIFFUSER
PURGE BOOST SWITCH LINK CONNECTOR
uses
sealed
ball
Otherwise change as required. (See Spares part list
bearings,
and
13
does
not
require
Do not dry the
Part Number
477957
477749
477893
477891
477955
478228
411150
.
further