Andrew 75E LFL Antenna Інструкція з монтажу Посібник з монтажу - Сторінка 7
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Антена Andrew 75E LFL Antenna. Andrew 75E LFL Antenna 12 сторінок. Rxtx antenna and co-located antenna systems
Також для Andrew 75E LFL Antenna: Інструкція з монтажу Посібник з монтажу (15 сторінок), Інструкція з монтажу Посібник з монтажу (13 сторінок)
Друкувати сторінкуANTENNA GROUNDING INSTRUCTIONS
7
Assure that ground wire is routed through support arm and down mount tube. Secure ground wire to
mount tube with cable ties.
IMPORTANT: All Antenna Systems must be properly grounded. Refer to NEC (National Electric Code) Article 810
and 820 and local building codes for specific requirements. A typical grounding method is shown below as an example.
Tighten all hardware securely to assure good continuity.
M16 x 16 mm
Hex Head Screw
Ground Lug
M6 Lock Nut
Route ground wire and cables (not supplied) through
clamps that provide a solid connection.
*
Coaxial Cables
(To IDU)
*
Ground Block
(NEC Section 810-20)
*
Ground Wire
(NEC Section 810-20)
*
Coaxial Cables
(From ODU)
*
Not Supplied
Tooth
Washer
Ground
Wire with
Ring Clip
To Ground
To Ground
Route Ground Wire Through
Support Arm
From Ground
From Ground
Attach ground wires to grounding rod with secure clamp.
6
Ground Wires
(Not Supplied)
Secure Clamp
(Not Supplied)
Grounding Rod
(Not Supplied)