Electrolux 922731 Посібник з монтажу - Сторінка 17

Переглянути онлайн або завантажити pdf Посібник з монтажу для Вентиляційна витяжка Electrolux 922731. Electrolux 922731 28 сторінок. Built-in hood for electric and gas oven

Hood weights

E.4
MODELS
922728
HOST11
922723
HOCT11E
922732
HOSS11
922727
HOCS11E
922725
HOCV11E
922730
HOSV11
922729
HOST21
922724
HOCT21E
922731
HOSS21
922726
HOCS21E
F
INSTALLATION AND ASSEMBLY
F.1 Place of installation
• The appliance must be installed in compliance
with the applicable local and national
regulations:
-
concerning air intake and exhaust;
-
the ventilation requirements specified for
cooking equipment must be met;
-
special precautions must be taken when
there are other naked-flame appliances in
the same room, to prevent the return of
fumes;
-
if the hood is installed over a gas appliance,
a non-self-resetting device that shuts off the
gas supply to the appliance if the hood
stops working must be fitted in accordance
with the national gas regulations;
-
hood installation must comply with the
applicable gas regulations.
• The following items must be connected to an
extraction system by means of the hood
exhaust hole. The system must only be
installed by authorised persons in accordance
with:
-
the required Aeraulic Performance (see
chap. E.2 – page 15);
the following manufacturer's installation
-
instructions;
-
the local rules and regulations regarding
extraction systems, municipal building,
electrical systems, water drainage, health
authorisations, and any other applicable
regulations on air intake and exhaust
systems.
Kg
lb
68
150
77
170
69
152
78
172
78
172
52
115
76
168
84
185
77
170
86
190
922728
922729
922730
922732
922731
• Before installing the hood, make sure the oven
is installed in compliance with the Oven
Installation Manual (chap. F - "INSTALLATION
AND ASSEMBLY")
• for AUSTRALIA only:
This appliance can only be installed by
authorised persons and in accordance with the
manufacturer's installation instructions, local
gas fitting regulations, municipal building
codes, electrical wiring regulations, local water
supply regulations, AS5601-gas installation,
health authorities and any other applicable
regulations. The appliance must be installed in
accordance with AS / NZS 3500.1 and AS/NZS
3500.3 standards. This unit is supplied with a
Watermark certified backflow prevention
device.
F.2 Unpacking and transport
1. Cut the plastic straps fixing the appliance to
the pallet;
HOST11
HOST21
HOSV11
HOSS11
HOSS21
17